Categories

Archive for the ‘cases’ Category

Laser cut acrylic case for Bus Pirate v3.6

Friday, May 6th, 2016

Luke Cyca made a laser cut acrylic case for the Bus Pirate. More awesome DIY cases. Get an assembled Bus Pirate for $30, including world-wide shipping. Also available from our friendly distributors.

Tags: , ,
Posted in cases | 1 Comment »

3D printed case for Bus Blaster v4

Tuesday, December 15th, 2015

dretay made a 3D-printed Bus Blaster v4 case: A basic enclosure for the Dangerous Prototypes Bus Blaster v4. The enclosure needs to be the full height of the programmer due to the jumpers. In the future I may trim down the jumpers on my board and use a thinner case that exposes more...

Tags: ,
Posted in cases | No Comments »

Logic Sniffer in a 33.6Kbps modem case

Wednesday, November 4th, 2015

Peter Murray blogged about his Logic Sniffer case made from a 33.6Kbps modem box: I have had my Open Workbench Logic Sniffer for quite a while and I have found it to be a very useful piece of kit. I have recently ordered an expansion to upgrade it to a...

Tags: , ,
Posted in cases | No Comments »

3D printed case for Logic Pirate

Monday, October 12th, 2015

eLab Hackerspace made a 3D printed case for Logic Pirate. You can get a Logic Pirate for $30.

Tags: ,
Posted in cases | 2 Comments »

Laser cut acrylic Logic Pirate case

Friday, August 28th, 2015

Bartimaeus  made a laser cut acrylic case for the Logic Pirate.  This case is up on  Thingiverse. More awesome DIY cases. You can get a Logic Pirate for $30.

Tags: ,
Posted in cases, Logic Pirate | No Comments »

How to build beautiful enclosures from FR4 — AKA PCBS

Friday, June 5th, 2015

Voja Antonic over at Hackaday posted a detailed how-to on building enclosure out of FR4— AKA PCBS: Another way is to build the enclosure out of FR4, a material which is commonly used in PCB production. Such enclosures are low-cost, with thin walls but yet very strong, nice looking, pleasant to...

Tags: ,
Posted in cases, how-to | 6 Comments »

Bus Pirate v3.6 acrylic case v1 (DP6037) back in stock

Wednesday, April 1st, 2015

Bus Pirate v3.6 acrylic case v1 (DP6037) is back in stock at Seeed Studio.  A clear laser-cut acrylic case kit for the Bus Pirate v3.6. Check out our tutorial on how to customize Sick of Beige cases. Get Bus Pirate v3.6 acrylic case v1 for $3.

Tags: ,
Posted in BP v3, cases, News | No Comments »

Laser cut cases for Bus Pirate and Logic Pirate

Thursday, March 19th, 2015

Chase made custom 3D printed/laser-cut cases for the Bus Pirate and Logic Pirate. These cases are up on  Thingiverse. See other cases too. Thanks Chase! Via the contact form.

Tags: , ,
Posted in cases | No Comments »

Laser cut chassis for ATX PSU board

Thursday, December 25th, 2014

‏@UsableMaterials tweeted,  "Made a quick lasercut chassis to go with my @dangerousproto ATX PSU board."   Get your own ATX breakout board bench power supply for $14 at Seeed Studio. You can also get a Sick of Beige case for your ATX breakout board for $4 at Seeed.

Tags: ,
Posted in ATX BB, cases | 2 Comments »

Automated CAD design

Tuesday, December 2nd, 2014

An Automated CAD design for enclosures by Jon. He writes: I recently kicked off laser cutting services on Anibit, and I plan to augment that service with a lot of specific product designs that I create. I'm a nut for automation and flexibility, and I'm deficient in intrinsic artistic talent. I...

Tags: ,
Posted in cases | No Comments »

Small USB IR Toy case

Wednesday, November 19th, 2014

This small IR Toy case by GHPS is up on  Thingiverse: Sick of beige cases? Then print it in blue, red, black - or the color that you want... The irToy by dangerousprototypes is a small, universal infrared controller for the USB bus. It can receive and send arbitrary ir...

Tags: , ,
Posted in cases | No Comments »

Bus Pirate v3.6 DIY plexiglass case

Tuesday, October 28th, 2014

Tim designed a plexiglass case for his Bus Pirate v3.6: Just a colourful photo of my newest acquisition, the Bus Pirate v3.6 in a quick 2hr diy plexiglass case More awesome DIY cases. Get an assembled Bus Pirate for $30, including world-wide shipping. Also available from our friendly distributors.  

Tags: ,
Posted in Bus Pirate, cases | No Comments »

Bus Pirate v4 Acrylic case kit v1 back in stock

Wednesday, October 15th, 2014

The Bus Pirate v4 Acrylic case kit v1 is back in stock at Seeed Studio.  This fits the earlier Bus Pirate v4 models which comes in the non-Sick of Beige PCBs. You can get one for $3 at Seeed Studio.

Tags: ,
Posted in BP v4, cases, News | No Comments »

Handmade cases for Bus Pirate v3.6 and Bus Blaster

Monday, September 15th, 2014

Enrique Murias made these DIY cases for his Bus Pirate v3.6 and Bus Blaster.   Via Twitter.  More cool DIY cases here. You can get a Bus Blaster v4 for $45 and a Bus Pirate for $30.

Tags: , ,
Posted in cases, DIY | No Comments »

ATX Breakout Board V1.1 Acrylic case back in stock

Tuesday, August 19th, 2014

The ATX Breakout Board v1.1 Sick of Beige case is back in stock at Seeed Studio. This case is designed to be simple, cheap, and easy to assemble. The ATX Breakout Board is sandwiched between two laser-cut acrylic sheets, and the whole assembly is held together with aluminum screws and...

Tags: ,
Posted in cases, News | No Comments »

Yet another laser cut Open Bench Logic Sniffer case

Tuesday, July 22nd, 2014

  Yet another laser cut Open Bench Logic Sniffer case by builttospec: This one is a bit thinner thanks to the use of brass inserts and 0.06" acryic for the board layer. The PCB is nice and secure and the buttons are easily accessable without the use of a paper...

Tags: ,
Posted in cases, Logic Sniffer | No Comments »

Bus Pirate v3.6 Sick of Beige v1 acrylic case v1 back in stock

Friday, July 11th, 2014

Bus Pirate v3.6 Sick of Beige acrylic case v1 is back in stock at Seeed Studio. Version 1 of the basic case is simple, cheap, easy to assemble, and fits our Sick of Beige standard PCB sizes. Check out our tutorial on how to customize Sick of Beige cases. Get...

Tags: ,
Posted in cases, News | 1 Comment »

Yet another Logic Sniffer case

Wednesday, July 9th, 2014

@0x2B2B tweeted, “Case for my OLS, laser cut at @RazorLAB. Design file in post 2byt, make your own! Why the case? Well, being the fan of OSS/OSH (that’s; Open Source Hardware :) that I am, this was a nice, affordable entry into the market of Logic Analysers. It’s always great...

Tags: , ,
Posted in cases, Logic Sniffer | No Comments »

Bus Pirate v4 Acrylic case kit v1 back in stock

Thursday, May 29th, 2014

The Bus Pirate v4 Acrylic case kit v1 is back in stock at Seeed Studio.  This fits the earlier Bus Pirate v4 models which comes in the non-Sick of Beige PCBs. You can get one for $3 at Seeed Studio.

Tags: ,
Posted in cases, News | No Comments »

Yet another Logic Sniffer case

Wednesday, April 9th, 2014

Here’s another cool acrylic case for Open Workbench Logic Sniffer by Phenoptix. Spent some time with the calipers and laser cutter earlier today and came up with what turns out to be yet another acrylic case! Dxf files for cutting are up on thingiverse. It does require a fixing not show in...

Tags: ,
Posted in cases | 1 Comment »

Next Page »

Recent Comments

  • coppice: If all you have found so far is fake iphones, the next place you should visit is SEG in Hua Qiang Bei. Get out of...
  • Edward Cooper: Great article and good find on the markets! Any chance you can provide the locations of these places? I'm in Shenzhen at the moment and...
  • Dan: I'm up for one
  • TrickyNekro: Always in for another bunch! :-D
  • mol-1: Maybe this time !