Categories

Archive for the ‘ATX BB’ Category

ATX breakout board bench power supply back in stock

Wednesday, February 24th, 2016

The ATX breakout board bench power supply is back in stock at Seeed Studio. This board recycles an old computer PSU into a handy bench tool with 3.3/5/12/-12 volt supplies. You can get one for $14 at Seeed Studio. You can also get a Sick of Beige case for your...

Tags:
Posted in ATX BB, News | No Comments »

ATX Bench power supply

Tuesday, June 2nd, 2015

@arbitraryuser tweeted picture of his desktop power supply: ATX breakout board fitted. Shortened and resoldered all the lines. Beautiful Desktop Power Supply! You can get one for $14 at Seeed Studio.

Tags: ,
Posted in ATX BB | No Comments »

DIY ATX Bench power supply

Monday, April 20th, 2015

@LuisMirandaAceb tweeted, "I started only with ATX PS and your breakout board but finally this is what I ended with... "  

Tags: , ,
Posted in ATX BB, power supply | 7 Comments »

ATX breakout board bench power supply back in stock

Friday, January 9th, 2015

The ATX breakout board bench power supply is back in stock at Seeed Studio. This board recycles an old computer PSU into a handy bench tool with 3.3/5/12/-12 volt supplies. You can get one for $14 at Seeed Studio. You can also get a Sick of Beige case for your...

Tags: ,
Posted in ATX BB, News | 2 Comments »

Laser cut chassis for ATX PSU board

Thursday, December 25th, 2014

‏@UsableMaterials tweeted,  "Made a quick lasercut chassis to go with my @dangerousproto ATX PSU board."   Get your own ATX breakout board bench power supply for $14 at Seeed Studio. You can also get a Sick of Beige case for your ATX breakout board for $4 at Seeed.

Tags: ,
Posted in ATX BB, cases | 2 Comments »

ATX breakout board bench power supply back in stock

Tuesday, November 11th, 2014

The ATX breakout board bench power supply is back in stock at Seeed Studio. This board recycles an old computer PSU into a handy bench tool with 3.3/5/12/-12 volt supplies. You can get one for $14 at Seeed Studio. You can also get a Sick of Beige case for your...

Tags: ,
Posted in ATX BB, News | No Comments »

Building a better breakout board for ATX PSUs

Monday, November 10th, 2014

Francesco Truzzi made a ATX Breakout board clone: These are the features I packed into it It has a 24-pin ATX connector Voltage lines are all broken out individually on binding posts LM317-based voltage regulator. Using a 300 ohm resistor and a 2K ohm potentiometer, voltage range is 1.25-9V 2 USB...

Tags:
Posted in ATX BB | 11 Comments »

ATX Breakout Board bench-top power supply build

Friday, September 19th, 2014

Kevin Rye shared his ATX breakout board bench-top power supply build in the project log forum: It took 3 weeks for my ATX Breakout Board to arrive from Seeed, but I finally got it! I was so excited to finally be able to make a bench-top power supply. I've always wanted...

Tags: ,
Posted in ATX BB, power supply, project logs | 3 Comments »

ATX breakout board bench power supply back in stock

Thursday, June 19th, 2014

The ATX breakout board bench power supply is back in stock at Seeed Studio. This board recycles an old computer PSU into a handy bench tool with 3.3/5/12/-12 volt supplies. You can get one for $14 at Seeed Studio. You can also get a Sick of Beige case for your...

Tags: ,
Posted in ATX BB, News | No Comments »

UK print press – Custom PC article on ATX breakout board

Monday, March 31st, 2014

Phenoptix writes:  "The review has hit the news stands today!" Thank you to Phenoptix for supporting the ATX breakout board bench power supply! Phenoptix in UK is a ATX breakout board  distributor, pick one up here. Via the contact form.

Posted in ATX BB, News | 5 Comments »

Bench top power supply

Thursday, March 13th, 2014

‏@mattbrailsford tweeted his DIY bench power supply. You can get one for $14 at Seeed Studio.

Tags: ,
Posted in ATX BB, power supply | 6 Comments »

Accurate-ish Pneumatic cylinder positioning with flow meter, ATX breakout and MSP430 LaunchPad

Friday, October 18th, 2013

arduinoversusevil writes: We're using the 43oh to control 12V solenoids supplied from a Dangerous Prototypes ATX breakout, and the Adafruit flow meter is feeding back position data to the 43oh. Surprisingly IT WORKS! For more build deets visit the blog Check out the video after the break. (more…)

Tags: , ,
Posted in ATX BB, DIY, MSP430 | 2 Comments »

ATX Breakout board bench power supply case

Friday, September 6th, 2013

Here’s another cool acrylic case for the ATX Breakout board bench power supply by Phenoptix: A rather handsome pair of acrylic plates, just a bit bigger than the ATX Breakout boards from Dangerous Prototypes. The design is heavily influenced by Seeed Studios product but we couldn't find the files to just copy...

Tags: ,
Posted in ATX BB, cases | No Comments »

ATX Bench power supply

Wednesday, August 7th, 2013

Nick Carter blogged about his DIY bench power supply with the ATX breakout board: There are tons of such projects out there on the internet but most involve hacking open the power supply and I didn’t think that was the way to go. I considered getting a cheap ATX adapter...

Tags: , ,
Posted in ATX BB, power supply | 2 Comments »

ATX panel

Wednesday, July 17th, 2013

Rynius writes: Here's my new mobile electronics bench featuring the ATX break out board. I'm hoping this will finally keep all my tools and wires consolidated and be pushed out of the way when needed. I'm planning on setting up a nice solder station opposite the power supply. The variable...

Tags:
Posted in ATX BB | 1 Comment »

DIY benchtop power supply

Friday, June 7th, 2013

Tom blogged about his benchtop power supply using the ATX breakout board he won in the 7400 competition: This time the build was going to be so much easier. I had the great fortune to win an ATX breakout board from Dangerous Prototypes in the 7400 logic competition. Once I...

Tags: ,
Posted in ATX BB | No Comments »

ATX breakout board bench power supply back in stock

Tuesday, April 9th, 2013

The ATX breakout board bench power supply is back in stock at Seeed Studio. This board recycles an old computer PSU into a handy bench tool with 3.3/5/12/-12 volt supplies. You can get one for $14 at Seeed Studio. You can also get a Sick of Beige case for your...

Tags:
Posted in ATX BB | 3 Comments »

ATX Breakout Board V1.1 Acrylic case back in stock

Monday, March 25th, 2013

The ATX Breakout Board v1.1 Sick of Beige case is back in stock at Seeed Studio. This case is designed to be simple, cheap, and easy to assemble. The ATX Breakout Board is sandwiched between two laser-cut acrylic sheets, and the whole assembly is held together with aluminum screws and...

Tags: ,
Posted in ATX BB, cases | No Comments »

Powering model rail with ATX breakout board

Wednesday, March 13th, 2013

BeanerSA tweeted:  "I suggested the ATX breakout to a friend who was having problems powering his model rail" You can get one for $14 at Seeed Studio. You can also get a Sick of Beige case for your ATX breakout board for $4 at Seeed.

Tags:
Posted in ATX BB | No Comments »

ATX breakout board V1.2

Monday, February 18th, 2013

Crenn tweeted a picture of his ATX breakout board v1.2 power supply: Got a @dangerousproto ATX Breakout Board V1.2. Hooked it up to a cheap chinese powersupply to test it out! You can get one for $14 at Seeed Studio. You can also get a Sick of Beige case for...

Tags:
Posted in ATX BB | 8 Comments »

Next Page »

Recent Comments