Categories

Posts Tagged ‘Sick of Beige case’

E-Paper clock in a Sick of Beige case

Tuesday, June 18th, 2013

Kevin Rye built this E-Paper clock and wrote a detailed explanation on his blog describing the build: I still have to put the finishing touches on the code. Instead of having the display constantly update, I'd like to set an alarm on the DS3231 RTC to go off once a...

Tags: ,
Posted in clock, project logs, Sick of Beige | 4 Comments »

ATX Breakout Board V1.1 Acrylic case V1 back in stock

Friday, February 1st, 2013

The ATX Breakout Board v1.1 Sick of Beige case is back in stock at Seeed Studio. This case is designed to be simple, cheap, and easy to assemble. The ATX Breakout Board is sandwiched between two laser-cut acrylic sheets, and the whole assembly is held together with aluminum screws and...

Tags: , ,
Posted in ATX BB | No Comments »

ATX Breakout Board V1.1 Acrylic case V1 back in stock at Seeed

Monday, January 7th, 2013

The ATX Breakout Board v1.1 Sick of Beige case is back in stock at Seeed Studio.  This case is designed to be simple, cheap, and easy to assemble. The ATX Breakout Board is  sandwiched between two laser-cut acrylic sheets, and the whole assembly is held together with aluminum screws and standoffs....

Tags: , ,
Posted in ATX BB, cases | 1 Comment »

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please