Posts Tagged ‘JTAG debugger’

A boatload of Bus Blasters

Thursday, January 8th, 2015

‏@joegrand tweeted this picture, "A boatload of Bus Blasters" The Bus Blaster is a high-speed JTAG debugger for ARM processors, FPGAs, CPLDs, flash, and more. You can get a Bus Blaster v3 for $34.95 and a Bus Blaster v4 for $45 at Seeed.

Tags: ,
Posted in Bus Blaster | No Comments »

PROTOTYPE: Bus Blaster v1 JTAG debugger

Friday, February 25th, 2011

The Bus Blaster is a  high-speed JTAG debugger/programmer that works with many ARM processors, CPLDs, FPGAs, and flash chips. It's compatible with the most popular open source JTAG utilities such as OpenOCD and urJTAG. After almost a year of on-and-off development the first Bus Blaster v1 prototype is available. This...

Tags: ,
Posted in Bus Blaster, Prototypes | 8 Comments »

PROTOTYPE: Ethernet JTAG debugger for OpenOCD

Tuesday, February 1st, 2011

We're releasing a stalled or abandoned prototype every few days while Seeed Studio is on break. We put a lot of work into these projects, but they're still missing major components and testing. If an abandoned project sparks your interest, we may have PCBs to get you started. The goal...

Tags: , ,
Posted in Prototypes | 17 Comments »

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please