Categories

Posts Tagged ‘Bus Blaster v1’

Free PCB Sunday: Bus Blaster v1

Sunday, March 27th, 2011

We go through a lot of prototype PCBs, and end up with lots of extras that we’ll never use. Every Sunday we give away a few PCBs from one of our past or future projects, or a related prototype. Our PCBs are made through Seeed Studio’s Fusion board service. Bus...

Tags: ,
Posted in Free PCBs | 27 Comments »

Free PCB Sunday: Bus Blaster v1

Sunday, March 6th, 2011

We go through a lot of prototype PCBs, and end up with lots of extras that we’ll never use. Every Sunday we give away a few PCBs from one of our past or future projects, or a related prototype. Our PCBs are made through Seeed Studio’s Fusion board service. This...

Tags: ,
Posted in Free PCBs | 16 Comments »

Free PCB Sunday: Bus Blaster v1

Sunday, February 27th, 2011

We go through a lot of prototype PCBs, and end up with lots of extras that we’ll never use. Every Sunday we give away a few PCBs from one of our past or future projects, or a related prototype. Our PCBs are made through Seeed Studio’s Fusion board service. This...

Tags: ,
Posted in Free PCBs | 17 Comments »

PROTOTYPE: Bus Blaster v1 JTAG debugger

Friday, February 25th, 2011

The Bus Blaster is a  high-speed JTAG debugger/programmer that works with many ARM processors, CPLDs, FPGAs, and flash chips. It's compatible with the most popular open source JTAG utilities such as OpenOCD and urJTAG. After almost a year of on-and-off development the first Bus Blaster v1 prototype is available. This...

Tags: ,
Posted in Bus Blaster, Prototypes | 8 Comments »

Recent Comments

  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please
  • Marko: armature -> amateur
  • Crawford: Dibs,