Nicu Florica blogged about his adjusting clock with alarm, hygrometer and thermometer on 1.8″ ST7735 display: I use feature from article Another adjusting clock with alarm & thermometer using DS3231 on 1.8″ ST7735 display and change reading internal temperature of DS3231 with DHT22 senzor (AM2302), but you can use a cheaper and not very precise DHT11 […]
Gianni Bernardo has published a tutorial for usage of DHT22 sensor with a PICmicro (machine translation). Tutorial about DHT22 / AM2302 Digital Humidity and Temperature sensor usage on picmicro, using XC Compiler. Code is for a PIC12F1822, data from sensor are formatted and sent on UART @9600baud Source code is available on github. Via the contact […]
Mikey writes: Just a few days ago I replaced the firmware on my Sonoff, and immediately after, I wanted more… After looking on their website, I found a version which also had a DHT11 sensor attached, and I then wanted to do something similar, just with a DHT22 for higher resolution (0.1C on a DHT22, […]
Davide Gironi published a new build, a Spark.io indoor ambient quality monitor: SXAM (Spark to Xively AMbient quality monitor), is an ambient quality monitor that logs 4 environmental parameters to the xively.com and display the ambient status by using for RGB leds. SXAM logs: Humidity Temperature Ambient noise Brightness Project info at Davide’s blog. Check […]
Martin’s DIY Internet connected smart humidifier project: The project uses a DHT22 temperature sensor mounted to the side of the enclosure for better ventilation and reliable reading: I threw in a ultra-cheap I2C OLED status display to get a visual reading. Milling the box so that the OLED shows was pretty nasty, hated it. I […]
Martin writes: The ESP8266 System-on-chip (SoC) has recently came out of nowhere and has been taking by storm the IoT DIY world. It is a $4.50 Wi-Fi capable chip that has remarkable specs, obsoleting overnight a number of similar products that are out there. The price factor, availability of SDK and a fast growing community […]
Xose Perez of Tinkerman has written an article detailing the build of his weather station: Arduino FIO based weather station with a DHT22 temperature & humidity sensor and a BMP085 barometric preassure sensor. The whole sensor will be powered by a solar panel (doubling as irradiance sensor) and backed by a LiPo cell.
Glyn Hudson over at OpenEnergyMonitor has developed this remote temperature and humidity monitoring node, the emonTH: The emonTH supports both the DHT22 (humidity and temperature) and DS18B20 either onboard or remote temperature sensor. The default software will search for the presence of either sensor at startup. If both sensors are found it will return humidity from the DHT22 […]