SXAM: A indoor ambient quality monitor

Posted on Wednesday, September 9th, 2015 in DIY by DP


Davide Gironi published a new build, a indoor ambient quality monitor:

SXAM (Spark to Xively AMbient quality monitor), is an ambient quality monitor that logs 4 environmental parameters to the and display the ambient status by using for RGB leds.
SXAM logs:

  • Humidity
  • Temperature
  • Ambient noise
  • Brightness

Project info at Davide’s blog.

Check out the video after the break.

This entry was posted on Wednesday, September 9th, 2015 at 1:24 pm and is filed under DIY. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please