Posts Tagged ‘alarm clock’

Adjusting clock with alarm, hygrometer & thermometer on 1.8″ ST7735 display

Friday, December 2nd, 2016

Nicu Florica blogged about his adjusting clock with alarm, hygrometer and thermometer on 1.8" ST7735 display: I use feature from article Another adjusting clock with alarm & thermometer using DS3231 on 1.8" ST7735 display and change reading internal temperature of DS3231 with DHT22 senzor (AM2302), but you can use a cheaper...

Tags: , , , ,
Posted in Arduino, clock | No Comments »

Linux alarm clock

Wednesday, May 25th, 2016

Benoit Frigon wrote an article detailing his alarm clock running Linux project, that is available on github: This is the display i made for my alarm clock project. The first version was a 24x7 LED matrix but later changed the design for a four digits seven segment display. I decided...

Tags: ,
Posted in clock | 1 Comment »

PIC24 bedside table alarm clock

Thursday, October 8th, 2015

Markus Gritsch posted pictures of his PIC24 bedside table alarm clock in the project log forum: Another year, another clock, but for the first time for my alarm clocks. I am not using an MSP430 but a PIC24 instead. Standby current is with 5.5 µA only slightly higher than that of my MSP430...

Tags: ,
Posted in clock, project logs | 21 Comments »

Vacuum fluorescent display alarm clock

Friday, January 31st, 2014

Vacuum fluorescent display alarm clock by Andrew Rossignol: I have been working on this fun little project for the last couple of days. I ordered this VFD display from Noritake as a free sample. I am quite grateful for their generosity and I decided to put this display to good use....

Tags: ,
Posted in clock | No Comments »

Alarm clock using an OLED

Thursday, January 2nd, 2014

Markus Gritsch writes: Inspired by this and this  wrist watch, I decided to build yet another iteration of my bedside table alarm clock, this time using an OLED. As a first step I made a handy breakout board for an 1.3" 128x64 OLED. The rest is soldered together on a perfboard....

Tags: ,
Posted in clock, OLED | 2 Comments »

Arduino MP3 alarm clock

Wednesday, July 17th, 2013

Bajdi built an Arduino MP3 alarm clock and wrote a detailed explanation on his blog describing the build: The idea is simple, an LCD that shows the date and time. A couple of buttons to set an alarm, and an MP3 module and small speaker to play an MP3 when the alarm goes...

Tags: ,
Posted in Arduino, clock | 2 Comments »

Dot-Matrix MSP430 alarm clock

Thursday, July 11th, 2013

[embed][/embed] Markus Gritsch shows off his Dot-Matrix MSP430 alarm clock. Via the project log forum.

Tags: ,
Posted in clock, MSP430, project logs | No Comments »

Money shredding alarm clock project

Thursday, May 2nd, 2013

[embed][/embed] Want to get up before the sunrise? Here's the money shredding alarm clock project by Rich Olson's to help you get yourself up early: If you have trouble getting out of bed a bed shaker alarm might be a bit extreme, you might be just fine if there is a bit of...

Tags: ,
Posted in clock | 4 Comments »

Sunrise alarm clock

Wednesday, April 3rd, 2013

Herpderp posted this picture of his sunrise alarm clock in the project log forum.

Tags: ,
Posted in project logs | 2 Comments »

Advanced alarm clock project

Tuesday, September 13th, 2011

Arup started an advanced alarm clock project in the forum: The hardware will contain a general purpose MPU with USB bootloader, and we just connect it to USB port for downloading our routines(*.csv files maybe) and appointments into it.

Tags: ,
Posted in builds | No Comments »

MSP430 bedside table alarm clock

Wednesday, April 6th, 2011

Markus shared his DIY alarm clock using an MSP430 in the project log forum. Video below. (more…)

Tags: ,
Posted in MSP430, project logs | No Comments »

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please