Categories

Eagle Parts: IN-12 Nixie and IV-22 VFD tube sockets

Posted on Tuesday, September 11th, 2012 in Eagle parts by DP

Added IN-12 Nixie socket (pictured above) and the IV-22 VFD socket (picture below) to our Eagle parts library. As you may have noticed from our recent updates, we’ve been playing around with Nixies and VFDs a bit lately…

This entry was posted on Tuesday, September 11th, 2012 at 5:00 pm and is filed under Eagle parts. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “Eagle Parts: IN-12 Nixie and IV-22 VFD tube sockets”

  1. Kevin Rye says:

    Just a heads up to anyone who plans on using this footprint: Double check your pinouts! I used this footprint for my IN-12A Breakout Board and all the pins-outs are wrong. Pin 7 is pin 1, pin 8 is pin 2, etc. The pinouts go counterclockwise looking top-down from the nixie starting from what they say is pin 7.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Dave B: Got two of them. If you let the battery run flat, they don't charge! You have to pull the battery, and get enough charge in...
  • Bill F: My turn?
  • Chris: Ok!
  • Bob: Free PCB for me!
  • Blars: Yet another meaningless comment.