3D Model: ATX Breakout Board v1.1 Sick of Beige case

Posted on Monday, August 13th, 2012 in 3D Model, cases, Sick of Beige by Filip

Today’s 3D model is the Sick of Beige case for the ATX Breakout Board v1.1. This board recycles an old computer PSU into a handy bench tool with 3.3/5/12/-12 volt supplies. The case uses  8x8mm standoffs and some bolts to hold together the 2 laser cut acrylic sheets. Expect it in production soon.

Check out out Sick of Beige customization tutorial explaining how to fit your project into our Sick of Beige cases.

The models will be published in the Dangerous Prototypes 3D warehouse collection. They are also uploaded to our SVN. You can find them inside the “art” folders in the respective project folders. Check out the 3D view below. You can zoom and rotate the model.

Below is a pic of the bottom sheet, it features a Dangerous prototypes logo, DP10080 standard size description, and the CC BY-SA text.

You can get a ATX Breakout Board v1.1 for $14 at Seeed Studio.

This entry was posted on Monday, August 13th, 2012 at 5:00 pm and is filed under 3D Model, cases, Sick of Beige. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

3 Responses to “3D Model: ATX Breakout Board v1.1 Sick of Beige case”

  1. Mats says:

    Beautiful rendering. It *almost* looks real – just a little bit to clean and shiny :-)

  2. Sjaak says:

    Why not use the standoff provided by the bananajacks? Dunno which ones are supplied with the ATX board, but the ones i use have two plastic insulator rings for panel montage.

    One minor detail the bottom letters B and A will just have outlines if cut :D

    Nice rendering though !

  3. Destate9 says:

    Oooooohhhh, dem acrylic renders

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • readybrek: Anyone got a any recommendations for a budget-priced hot air station?
  • William: lol I'm happy to waste 3c for each program/debug cycle... but probably not the time spent soldering a new device down to a proto board!...
  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...