Categories

Posts Tagged ‘Teensy 3.1’

1-Pixel Pacman

Monday, June 1st, 2015

Mike Szczys of Hackaday built 1-Pixel Pacman and wrote a blog post detailing its assembly: I usually see retro-gaming projects using tiny screens with a fair number of pixels (64×64) but what I really like is the look of making every pixel count. With this in mind I built 1-Pixel Pac-Man, the...

Tags: , , ,
Posted in LEDs | 1 Comment »

Teensy SDR transceiver description

Friday, March 20th, 2015

rheslip  has been working on a software defined radio using the Arduino compatible Teensy 3.1 and audio shield from PJRC. Source code is available on Github. Project info at Open Emitter blog.

Tags: ,
Posted in Arduino, SDR | 1 Comment »

Power playground project

Thursday, February 19th, 2015

Spacewrench over at Dorkbotpdx published a new build, a Power Playground project: It's a PMOS/NMOS H-Bridge with FETs that can handle 3 amps or so, plus a SPI current sensor, some switches & a rotary encoder (not stuffed yet), and a 7-segment display, all controlled by a Teensy-3.1 running FreeRTOS. I made this because...

Tags: ,
Posted in hacks | 2 Comments »

Back to the mc-17 remote control

Wednesday, October 29th, 2014

Tim writes: After the Maker Faire, I went back to the Graupner mc-17 remote control. The Arduino library from tronixstuff for the KTM-S1201 LCD which is also using a mPD7225 controller was a good starting point. But to get the LCD up and running, it took quite a bit of...

Tags: , , , , ,
Posted in hacks, Logic Pirate | No Comments »

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please