Categories

Teensy SDR transceiver description

Posted on Friday, March 20th, 2015 in Arduino, SDR by DP
This entry was posted on Friday, March 20th, 2015 at 11:19 pm and is filed under Arduino, SDR. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “Teensy SDR transceiver description”

  1. rumburack says:

    Informations on his website are a biut unclear. I try to sum up what he does. He has

    – a softrock sdr radio ($80?). Softrock goes from 1.8 MHz to 30 MHz. The audio goes to
    – a Teensy Audio Adaptor Board ($15) microphone that is driven by a
    – Teensy 3.1 ($20) and displays some histograms on a
    – TFT 128×160 display ($5).

    Have a look at STAMPFL – Stand Alone SDR: https://www.youtube.com/watch?v=n23yXiJnWBM
    (the funny voice in the video is some sort of German…)

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please