Categories

Posts Tagged ‘Pololu’

Pololu Black Friday sale

Sunday, November 24th, 2013

Ryan from Pololu informs us about their biggest Black Friday sale: Pololu Robotics and Electronics is having its biggest Black Friday sale yet, discounting hundreds of sensors, actuators, motor controllers, and other robot parts by 30% to 60% and offering an additional 11% to 15% off orders over $100! Buy...

Tags: ,
Posted in Holiday, kit biz | No Comments »

Pololu Black Friday sale

Friday, November 23rd, 2012

Ryan from Pololu informs us about their biggest Black Friday sale: Pololu Robotics and Electronics is having its biggest Black Friday sale yet, starting this Thursday. You can get up to $30 off your entire order in addition to saving up to 60% on dozens of selected products, including the Pololu...

Tags: ,
Posted in Holiday, kit biz | No Comments »

Sparkfun and Pololu 5V boost circuits

Tuesday, August 23rd, 2011

A product comparison from the forum: I recently compared two similar 3V -> 5V boost circuits, the Sparkfun #08999 5V out @ 100 mA (based on NCP1400) and the Pololu #798 5V out @ 200 mA (based on NCP1402). The details are below, but the executive summary is: the Pololu...

Tags: , ,
Posted in kit biz | 2 Comments »

Thermal Tweeter laser-cut acrylic stand

Monday, August 22nd, 2011

A few weeks ago Tayken designed a laser-cut acrylic case for the Thermal Tweeter. We had it cut at Pololu for $25. It took about 24 hours to cut and ship the case. You can check out the Thermal Tweeter, in its spiffy laser-cut case, at the Open Hardware Summit...

Tags: ,
Posted in cases | 3 Comments »

Recent Comments

  • gant: They still have a couple of the more expensive (but still considerably cheap) 5S-I-S01 in stock...
  • readybrek: Anyone got a any recommendations for a budget-priced hot air station?
  • William: lol I'm happy to waste 3c for each program/debug cycle... but probably not the time spent soldering a new device down to a proto board!...
  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!