Posts Tagged ‘OLED-display’

Simple 0.96″ 128×64 OLED breakout board

Wednesday, January 15th, 2014

noahp shared his breakout for 0.96" 128x64 OLED display in the project log forum: Thought I'd share this design here in case it can be of use to anyone. Includes python script that initializes and loads data to the ssd1306 (please excuse the logo pandering, needed a simple example and that...

Tags: ,
Posted in project logs | No Comments »

Arduino: OLED PCF8574 I2c back pack

Thursday, December 19th, 2013

Rupert Hirst  writes,  "After the success using the Midas MCOB21605G1V 1602 OLED display in my previous article. My next challenge would be connecting the module to my  i2C backpack custom PCB, Using the PCF8574 i2c IC"

Tags: ,
Posted in Arduino, LEDs | No Comments »

PCB a Week 5: Oledy generic OLED breakout board

Monday, January 14th, 2013

Mats continues his challenge of designing one PCB every week. In week 5 he came up with Oledy, a breakout board featuring 8 most common pitches for OLED display connectors, spanning from 0.5mm to 1mm. The Oledy board is a 5x5 cm board meant to be cut in half ending...

Tags: , ,
Posted in PCBs, project logs | 1 Comment »

OLED display plasma routine

Saturday, February 26th, 2011

A plasma routine on an OLED display inspired by the CC65 plasma demo. Thanks Markus! Via the comments.

Tags: ,
Posted in hacks, LEDs | No Comments »

OLED display sine-scroller

Friday, February 18th, 2011

Markus demonstrates his OLED display sine-scroller: The OLED board sold by SeeedStudio used I2C to communicate with the MCU. I found that updating the screen this way takes too long to get a descent refresh rate, so I modified the board to be able to access the driver chip using...

Tags: ,
Posted in hacks, LEDs | 3 Comments »

OLED display with the Bus Pirate

Monday, February 14th, 2011

Die Schatenseite demonstrates an OLED display (original , machine translation) with the Bus Pirate. Via eHajo, a Bus Pirate distributor in Germany. Get your own handy Bus Pirate for $30, including world-wide shipping. Also available from our friendly distributors.

Tags: ,
Posted in Bus Pirate, demonstrations | No Comments »

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please