Categories

Simple 0.96″ 128×64 OLED breakout board

Posted on Wednesday, January 15th, 2014 in project logs by DP

oled_bp

noahp shared his breakout for 0.96″ 128×64 OLED display in the project log forum:

Thought I’d share this design here in case it can be of use to anyone. Includes python script that initializes and loads data to the ssd1306 (please excuse the logo pandering, needed a simple example and that was right in front of me).

Via the forum.

This entry was posted on Wednesday, January 15th, 2014 at 1:00 pm and is filed under project logs. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please