Categories

Posts Tagged ‘GPRS’

GPS tracking with an MSP430F5510 over GPRS

Friday, March 24th, 2017

Bluehash over at 43oh.com writes: I found a tiny gem while browsing Github for MSP430 projects. This one is a GPS tracker based on a MSP430F5510 with a GPRS cellular connection for reporting and command input. The GPS is a FGPMMOPA6H from GlobalTop and the GPRS module is a SIM900 from...

Tags: ,
Posted in MSP430 | No Comments »

GPRS module with M590 for SMS projects

Saturday, June 11th, 2016

From the comments on our earlier Neoway M590 GPRS tutorial post, the GPRS module with M590 for SMS projects by Nicu: In 1st part I present you few data about GPRS module with M590 chip and how send SMS from them. In 2rd part I send SMS from phone and SMS is...

Tags: , ,
Posted in Arduino, how-to | No Comments »

Neoway M590 GPRS tutorial: sending and receiving files from/to SD card

Friday, June 10th, 2016

Neoway M590 GPRS tutorial on sending and receiving files from/to SD card from Vadim Panov: Here's a bit of useful info from what I've been doing lately. I got a job to design a device that connects to a web-server via GPRS and downloads a bunch of tiny WAV files,...

Tags: , ,
Posted in tutorials | 6 Comments »

Realtime GPS+GPRS tracking of vehicles using Arduino

Sunday, September 14th, 2014

Javier from CookingHacks writes: We made a

Tags: , ,
Posted in Arduino, code, sensors | 1 Comment »

28C3: Cellular protocol stacks for internet — demystified

Saturday, February 4th, 2012

Harald Welte presented this talk at the 28C3 Chaos Communication Congress in Berlin. While we use packet oriented transmissions daily over cellular networks, unlike TCP/IP and Ethernet many even in the hacker community are not familiar with the actual protocol stacks for those cellular packet networks. The purpose of this...

Tags: , , , , ,
Posted in code, data transfer, open source, talks, wireless | 1 Comment »

Open source GSM/GPRS autonomous weather station

Wednesday, November 9th, 2011

Andrianakis built an autonomous data logging system using a GSM/GPRS cell phone modem module to transmit data to a online server. It's designed to read wind velocity for a future wind power station installation. A PIC16F877A communicates with a SIM900 GSM/GPRS module, and reads sensor values. By using a battery...

Tags: , ,
Posted in dev boards | 3 Comments »

GPRS Arduino shield with SIM900 module

Thursday, March 31st, 2011

McZ tipped us to the GPRS shield using the new SIM900 cellular data module in a followup to our position location with GSM cellular post. GSM/GPRS 850/900/1800/1900MHz ... for voice, SMS, Data, and Fax in a small form factor and with low power consumption. It is controlled via AT commands (GSM...

Tags: ,
Posted in Arduino, wireless | 7 Comments »

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please