Categories

Open source GSM/GPRS autonomous weather station

Posted on Wednesday, November 9th, 2011 in dev boards by DP

Andrianakis built an autonomous data logging system using a GSM/GPRS cell phone modem module to transmit data to a online server. It’s designed to read wind velocity for a future wind power station installation.

A PIC16F877A communicates with a SIM900 GSM/GPRS module, and reads sensor values. By using a battery and a solar cell charger, it can be deployed for long periods without intervention.  All the hardware and software is open source.

Via the contact form.

This entry was posted on Wednesday, November 9th, 2011 at 9:00 pm and is filed under dev boards. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

3 Responses to “Open source GSM/GPRS autonomous weather station”

  1. Mike Dib says:

    Hi there

    Very interested in this project. Would love to know more. What are the requirements? (Hardware/software) I’m very new to this field and would love to know how I would go about building something like this.

    Thanks

  2. Henk Potgieter says:

    Hi

    I would also like to know more on the project. Would help me wit som of my projects. Will you be willing to help?

    Regards

    Henk Potgieter

  3. Frey Clante says:

    Hi can i have the source code? i will use it in a hobby project.

    Best Regards

    Frey Clante

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • gant: They still have a couple of the more expensive (but still considerably cheap) 5S-I-S01 in stock...
  • readybrek: Anyone got a any recommendations for a budget-priced hot air station?
  • William: lol I'm happy to waste 3c for each program/debug cycle... but probably not the time spent soldering a new device down to a proto board!...
  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!