Eagle Parts: Serial 1.8” TFT and 2×10 shrouded header update

Posted on Tuesday, July 24th, 2012 in Eagle parts by DP

Lately we’re playing around with a 1.8” serial interface TFT which can be bought from eBay for ~$6. We added it to our Eagle part library.

We also found some errors on the standard Eagle footprint for 2×10 shrouded headers we use in the Bus Blaster v3. Image of the new, fixed shrouded header’s footprint, and schematic symbol are below.

This entry was posted on Tuesday, July 24th, 2012 at 11:00 pm and is filed under Eagle parts. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “Eagle Parts: Serial 1.8” TFT and 2×10 shrouded header update”

  1. cubeberg says:

    FYI – RobG @ 43oh has been working on a booster pack for this LCD
    thread link
    for purchase

    Not meant to be a plug – just thought people might be interested.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Nathan Johnson: 100 channels. Not many are legal in any given area. Be sure to comply with local laws.
  • William Brodie-Tyrrell: It's getting to the point where it's cheaper and definitely easier to use a Pi Zero or similar and a $20 3G USB dongle. Power...
  • KH: IIRC most of the actual operating system of modern HDDs is in one of the platter(s); the stuff on the 25VF010 is a bootup firmware......
  • Trev: I don't know of any inexpensive 3G modules (prices start around $US 50), but it does explain why 2G modules are relatively inexpensive by comparison....
  • Zonie: This site Rocks!