Categories

Workshop Update for July 24th, 2012

Posted on Tuesday, July 24th, 2012 in Workshop Update by DP

We ordered a new batch of stickers for the Singapore Maker Faire.

An order of Sick of Beige cases came from Seeed today, so we started preparing for the casing workshop video early.

We continued the case designs for the Bus Blaster v3, and the Part Ninja. The Bus Blaster case is complete, while with the Part Ninja we hit a few snags as much of the PCB needs to be exposed to provide easy access.

This entry was posted on Tuesday, July 24th, 2012 at 11:00 pm and is filed under Workshop Update. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

4 Responses to “Workshop Update for July 24th, 2012”

  1. bluehash says:

    Hi DP.. where do you get your stickers from? Do they have an online shop?

    • Ian says:

      I just use a local printer, especially for stuff like this because I never do it until the week before.

      I would like to get a roll or die cut stickers made though, wherever it’s cheap enough.

  2. oakkar7 says:

    How about Open Workbench Logic Sniffer?
    It should be redesigned with standard case.

    • dsm says:

      Just redesigning the OBLS board to fit one of the new SoB cases may not be the best approach since the underlying OBLS electrical design has a number of fundamental defects that need attention.
      Look for a redesign proposal in the OBLS forum in a couple weeks.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Drone: So these go for around $330 USD and NO published calibration procedure online or otherwise? Given what's inside - I don't think I'll be considering...
  • Pekka Akselin: This is ridiculous!? :-) We are back at 256(!) byte EPROMs that needed multiple, a handful, of voltages to run! :-(
  • KH: Let's try a back-of-envelope calc balancing energies. From MCP1700 datasheet, there are graphs for a 200mA load step. Estimate the energy shortfall as 12uJ. Say...
  • Daniel: It's been a week and my comment is still awaiting moderation. Apparently the CIA doesn't want their involvement known?
  • KH: Agree, so okay, I guess he must have learned from somewhere. 100nF and 1000uF is so far apart, that was jarring; it's more magic incantation...