Categories

Logic Sniffer laser cut case

Posted on Saturday, July 31st, 2010 in cases, logic analyzer by Ian

parag0n made a laser cut case for the Logic Sniffer. If you have a laser cutter, grab the design files and build your own. See other cases for the Logic Sniffer too.

You can order the Logic Sniffer at Seeed Studio for $45, including worldwide shipping. Don’t forget that Seeed now has probe cables for $6 each. Every order supports Logic Sniffer development.

Via the forum.

This entry was posted on Saturday, July 31st, 2010 at 11:59 am and is filed under cases, logic analyzer. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please