Tom writes, “I can’t believe it! I actually finished a project the same day that I started it. A while back I won a Raspberry Pi Zero W in a promotional competition for Zipcar, and today I set it up as a wireless print server.” More details on Magic Smoke blog.
The Cassette Pi IoT scroller project @ kyliemander.com The Cassette Pi is a self-contained real-time notification scroller, all housed neatly inside a transparent cassette tape. A Raspberry Pi Zero is sandwiched between the two tape reels, retrieving Internet of Things notifications from the fabulous IFTTT service, delivered almost instantly to the Pi via an Adafruit.IO […]
Sami Pietikainen has written an article detailing the build of his Bluetooth DAC using Raspberry Pi Zero W: My car comes with a built-in Bluetooth hands-free but unfortunately it does not support audio streaming. Luckily there is an AUX input available which uses a regular 3,5 mm jack. Perfect opportunity for a DIY project. I built the […]
A smaller thinner PocketPi from Facelesstech: Thinner with a simpler design but packing the same feature as before. At its heart is a raspberry pi zero W with a 3.5″ screen 480×320. It has all the GPIO pins available what aren’t being used by the screen. Its powered by a 2500mAh battery and has one full […]
Facelesstech published a new build: I’ve been on a quest for while now trying to build a retropie handheld that was functional but didn’t break the bank. So far I’ve made ZeroBoy – A poor man’s retropie “portable” and a follow-up ZeroBoy rev C – An improved poor mans retropie portable. These were great but […]
Lucky Resistor published a new build: This article is about a small sensor node with a decorative case. It is based on the Raspberry Pi Zero W board with a custom sensor shield on top. I publish all hardware files for a simple version of the sensor, so you should be able to build this […]