Categories

Posts Tagged ‘sensor node’

Tiny particle sensor node with decorative case

Wednesday, March 13th, 2019

Lucky Resistor published a new build: This article is about a small sensor node with a decorative case. It is based on the Raspberry Pi Zero W board with a custom sensor shield on top. I publish all hardware files for a simple version of the sensor, so you should...

Tags: ,
Posted in R-Pi, sensors | No Comments »

A high-resolution sensor node

Saturday, December 31st, 2016

A high-resolution sensor node from JeeLabs: The JeeNode Zero is intended as sensor node in a Wireless Sensor Network. This requires: a sensor we can read out periodically, such as the BME280 being able to sleep with a very low current, as recently described the ability to run the node...

Tags:
Posted in sensors | No Comments »

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please