Posts Tagged ‘manual’

App note: Comprehensive manual for SMD components

Sunday, January 22nd, 2012

Here is a comprehensive manual for SMD components. It covers most common SMD components used in the electronics industry today. Package dimensions as well as markings are covered. This brochure brings a help and clearance for a newcomer and moreover should help a service technician to start a repair of...

Tags: , ,
Posted in app notes | 4 Comments »

Our bookshelf: C a Reference Manual

Monday, June 6th, 2011

Every now and then we need a good general reference while programing in C. C a Reference Manual, coauthored by Samuel Harbison 3rd. and Guy Steele Jr. is a great addition to any software hacker's bookshelf. now in its fifth edition it covers c from the c standard (c1989) to...

Tags: , ,
Posted in software | 11 Comments »

Documentation wiki now available

Saturday, July 3rd, 2010

A new documentation wiki has replaced the old project manual pages. A bunch of stuff has already been moved and formatted for the wiki. The wiki is open for public editing. We could use your help moving and updating guides,  and adding important details from the blog comments. If you...

Tags: , ,
Posted in help, News, site | No Comments »

Updated Bus Pirate manual

Tuesday, November 3rd, 2009

The Bus Pirate manual has new pages for each bus mode: 1-Wire, UART, I2C, SPI, JTAG, raw 2-wire, raw 3-wire, PC keyboard, HD44780 LCDs, MIDI It should be easier to maintain each page and add new documentation as needed. We're also going to leave comments enabled so you can help...

Tags: ,
Posted in Bus Pirate | 1 Comment »

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please