Posts Tagged ‘EEWeb’

EEWeb PULSE: Bus Pirate as low-cost JTAG programmer

Thursday, March 14th, 2013

FourthDr  tweeted this article on EEWeb PULSE about Programming with Low-Cost JTAG tools that references the Bus Pirate: I would recommend the Bus Pirate as a very low cost programming tool (and it's useable for so many other things too!). I have even written a guide on how you use...

Tags: ,
Posted in Bus Pirate | 5 Comments »

Ian featured engineer on EEWeb

Tuesday, January 22nd, 2013

EEWeb posted an interview with Ian today. The article covers how Ian got started in electronics, his favorite hardware and software tools, and a few interesting experiences in the open hardware industry. Covered as well are Ian's future plans for Dangerous Prototypes and the challenges open hardware faces as it...

Tags: ,
Posted in interviews | 1 Comment »

EEWeb PULSE: Bus Pirate as low-cost JTAG programmer

Friday, August 31st, 2012

Frank noticed this article on EEWeb PULSE about Programming With Low-Cost JTAG Tools (PDF!) that references the Bus Pirate: If you’re not a big fan of building it yourself, then you could use one of the (X)SVF players that are available on the internet. Notable is the Bus Pirate from Dangerous Prototypes....

Tags: ,
Posted in Bus Pirate, programmers | No Comments »

EEWeb: Bus Pirate as low-cost JTAG programmer

Saturday, May 26th, 2012

Victor Joukov noticed this article on the EEWeb electrical engineering community about Programming With Low-Cost JTAG Tools, referencing the Bus Pirate. Notable is the Bus Pirate from Dangerous Prototypes. Originally designed as a tool to sniff, monitor, inject or bus protocols like SPI, its open platform has meant that the...

Tags: ,
Posted in Bus Pirate, News, programmers | 1 Comment »

Secret Santa for electronics geeks

Monday, December 19th, 2011

Return-to-zero At times like these it's always good to know you're not the only one that would rather have a reel of caps instead of a wool sweater. Via the comments.

Tags: ,
Posted in Comic | 8 Comments »

Return-to-zero engineering comic

Saturday, February 12th, 2011

Return-to-zero is a new comic strip for engineers: We bring to light the "Engineers World" with lab humor, exploding circuits, and of course making a sport out of solving the trickiest of engineering problems. We're also big fans of xkcd, another long-running tech geek and engineering comic. Thanks Elaina! Via...

Tags: ,
Posted in idle | 2 Comments »

Recent Comments

  • readybrek: Anyone got a any recommendations for a budget-priced hot air station?
  • William: lol I'm happy to waste 3c for each program/debug cycle... but probably not the time spent soldering a new device down to a proto board!...
  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...