Categories

Arduino stepper motor driver tutorial

Posted on Wednesday, October 16th, 2013 in Arduino, Logic Shrimp by DP

Fig01

Here’s a tutorial from VK1od.net :  Arduino stepper motor driver with the Logic Shrimp logic analyzer

This tutorial shows how to explore an inexpensive stepper motor and driver board using an Arduino and included stepper library.
The stepper motor and driver board can be purchased on eBay at very low cost, and is an ideal educational project for the budding Arduino practitioner.

Get a Logic Shrimp from Seeed for $35.

This entry was posted on Wednesday, October 16th, 2013 at 11:24 am and is filed under Arduino, Logic Shrimp. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “Arduino stepper motor driver tutorial”

  1. Darren says:

    I just ordered the same parts a week ago now I know where to find a tutorial. It’s hard to believe the stepper motor with the ULN2003 included was only $3 including shipping on Ebay.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Pekka Akselin: This is ridiculous!? :-) We are back at 256(!) byte EPROMs that needed multiple, a handful, of voltages to run! :-(
  • KH: Let's try a back-of-envelope calc balancing energies. From MCP1700 datasheet, there are graphs for a 200mA load step. Estimate the energy shortfall as 12uJ. Say...
  • Daniel: It's been a week and my comment is still awaiting moderation. Apparently the CIA doesn't want their involvement known?
  • KH: Agree, so okay, I guess he must have learned from somewhere. 100nF and 1000uF is so far apart, that was jarring; it's more magic incantation...
  • Max: I have a suspicion the hefty electrolytic cap might be some sort of cargo cult carry-over from other RF-based projects - for instance, I've seen...