Categories

QR clock

Posted on Wednesday, February 27th, 2013 in project logs by DP

IMG_3101_2000x1500_80-W600

Markus shared his QR clock in the project log forum:

being inspired by ch00ftech’s QR clock  I made my own variation of this nice idea: A PIC32 decodes the time signal from a DCF77 receiver, calculates a QR code containing this time information, and displays it animated at 30 FPS on a ST7735R LCD. Without a radio signal the QR code is being displayed in b/w. A nice plasma effect is added when it locks to the DCF77 signal.

Check out the video after the break.

This entry was posted on Wednesday, February 27th, 2013 at 7:00 pm and is filed under project logs. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “QR clock”

  1. dext0rb says:

    The trippy color effects were awesome and very unexpected. Sweeeeeeeeeeeeet.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Sjaak: In theory the buspirate can also do SWD or JTAG as it just wiggling some pins. I dunno if the speed and memory is sufficient...
  • Drone: Aw, how-come Bus-Pirate can't do all this too?
  • Siddharth: Grate
  • jeanmarc78: hello
  • KH: So I guess, don't mind us dinosaurs too much. Someone like me will get triggered by some of the things Arduino folks do. There's just...