Simple shrink wrap Bus Pirate case

Posted on Tuesday, January 15th, 2013 in Bus Pirate, cases by DP


Voidptr used clear shrink wrap to encase his Bus Pirate v3 and cut holes for the IO headers.

See our case video from a few months ago, and even more awesome DIY cases from Bus Pirate fans.

Check out our Bus Pirate Sick of Beige case now selling at Seeed for $3.

Get an assembled Bus Pirate v3 for $30, including world-wide shipping. Also available from our friendly distributors.

Via the forum.

This entry was posted on Tuesday, January 15th, 2013 at 1:00 pm and is filed under Bus Pirate, cases. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

2 Responses to “Simple shrink wrap Bus Pirate case”

  1. voidptr says:

    lol it is on the news blog !
    I had to cut the holes before heating the shrink, this is why those holes are a bit to big and weird…

  2. magetoo says:

    Now that is clever.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • KH: A power-off current draw of 4mA for the Sony A6000 is a defect, product recall territory. It hits the camera battery with unacceptable wear and...
  • KH: Hydroponics is like home automation. Every year you have folks who start projects like these and think it will take off and become a big...
  • KH: Read the linked article. The A6000 has an unusually high standby/sleep current. The adapter's quiescent current is not an issue, but the A6000 sleep current...
  • Drone: Jeez, the very limited DCA: 40A/400A±3.0% capability, no RMS at all, and the CAT=DEATH rating makes this a NO BUY at any price - much...
  • Drone: Back-Story... Quoting: "HydroBot is a modular control system for automating hydroponic gardens." More about it here: Interesting work. But I would like to see...