Categories

Eagle Parts: INA138 high-side current shunt monitor

Posted on Tuesday, September 25th, 2012 in Eagle parts by DP

We added the INA138 high-side current monitor to our Eagle parts library. This is the part used in the Smoke Tester to read current through a voltmeter. It basically mirrors the current going through its shunt resistor to a load resistor. By playing with these values you can get an easy shunt current to output voltage ratio to make calculating current a no-brainer.

This entry was posted on Tuesday, September 25th, 2012 at 9:00 pm and is filed under Eagle parts. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Sjaak: In theory the buspirate can also do SWD or JTAG as it just wiggling some pins. I dunno if the speed and memory is sufficient...
  • Drone: Aw, how-come Bus-Pirate can't do all this too?
  • Siddharth: Grate
  • jeanmarc78: hello
  • KH: So I guess, don't mind us dinosaurs too much. Someone like me will get triggered by some of the things Arduino folks do. There's just...