Categories

Stained hardwood case for the Bus Pirate v4

Posted on Monday, June 11th, 2012 in Bus Pirate, cases by DP

Here’s a stained maple-wood case for the Bus pirate v4, milled by Vince at the Xerocraft hackerspace in Tuscan Arizona. The Bus Pirate is an open source hacker multi-tool that talks to electronic stuff. It’s got a bunch of features an intrepid hacker might need to prototype their next project.

The Bus Pirate is sold as a bare board, which puts it at risk of shorts from messy work surfaces with conductive things like paper clips and staples laying around.  I’ve decided I really like this device, so I figured I’d make a case to protect it.

Check out our workshop video about cases, and many posts with community built cases for our projects.

You can get a Bus Pirate v4 for $40, including worldwide shipping.

Via the forum.

This entry was posted on Monday, June 11th, 2012 at 9:00 pm and is filed under Bus Pirate, cases. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

2 Responses to “Stained hardwood case for the Bus Pirate v4”

  1. Willemite says:

    Cool, nearly identical to mine but I did not bother staining, and used white oak….

  2. anon says:

    *Tucson, Arizona

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Bob: Free PCB for me!
  • Drone: Nice - but I'm most interested in the enclosure with the finger-leaf cover. Where did that come from? How to buy more?
  • Dave B: Got two of them. If you let the battery run flat, they don't charge! You have to pull the battery, and get enough charge in...
  • Bill F: My turn?
  • Chris: Ok!