Categories

App note: Calculating the error budget in precision DACs

Posted on Saturday, April 28th, 2012 in app notes by DP

How to chose a voltage reference and digital to analog converter chips to get the precision and stability you need:

This application note focuses on Maxim’s 3-terminal voltage references and precision DACs. To design a system, one must first understand how the parts are specified and then how their performance characteristics interact. Voltage references and DACs have many specifications. Only those factors relevant to the error budget will be discussed here.

This entry was posted on Saturday, April 28th, 2012 at 11:00 am and is filed under app notes. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

3 Responses to “App note: Calculating the error budget in precision DACs”

  1. Jay Wilkinson says:

    Where’s the LINK?

  2. Ian says:

    Sorry guys, fixed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Sjaak: In theory the buspirate can also do SWD or JTAG as it just wiggling some pins. I dunno if the speed and memory is sufficient...
  • Drone: Aw, how-come Bus-Pirate can't do all this too?
  • Siddharth: Grate
  • jeanmarc78: hello
  • KH: So I guess, don't mind us dinosaurs too much. Someone like me will get triggered by some of the things Arduino folks do. There's just...