Categories

USB Analog/digital logger

Posted on Tuesday, December 13th, 2011 in project logs by DP

Arhi started started working on a USB/UART analog and digital logger:

It’s a simple USB logger that can log 12 analog and 3 digital channels + data from MAX6675 (thermocouple driver). It sends the data via usb or uart.

We think this is a very useful device that has a place on every bench top. We often find ourselves needing to monitor various signals at low speeds, and breaking out a scope or a DSO is too much of a hassle.

Arhi promises to write up the firmware once he has time for it.

Via the forum.

This entry was posted on Tuesday, December 13th, 2011 at 10:00 pm and is filed under project logs. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “USB Analog/digital logger”

  1. arhi says:

    This is a very old project btw .. and it’s unfortunately waiting for firmware more then 5-6 months.

    I think the UBW firmware could be used as a starting point for this firmware but .. donno ..

    The pcb ain’t much it’s more less breakout board for 18F2550 with MAX6675..

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Stennly: Despite the popularity of STM32s, it may not be the best place to start. As mentioned already, the Silicon Labs gecko family is cheap to...
  • Helge: Silicon Labs offer a powerful, unrestricted and completely free software development kit packaged with their Simplicity Studio IDE. It's built on Eclipse, and includes hundreds...
  • Sjaak: With development kit I ment software development kit. I couldn't (easily) find one back some time. Then I asked around and finally came up with...
  • Pranav gulati: I probably couldn't understand what you meant by ' ST doesn’t offer a development kit as I expected' There are numerous eval boards of STM32...
  • DP.: fixed, thanks