Categories

Posts Tagged ‘USB adapter’

CANable: the open source USB to CAN adapter

Tuesday, May 29th, 2018

An open-source USB to CAN adapter: It supports CAN bit-rates of up to 1 Mbit/s. The product comes with an open-source SocketCAN driver software. It features a Micro-USB connector and a 4-pin screw terminal with CAN_H, CAN_L, 5-V supply, and ground. The CANable device is a hardware clone of Eric...

Tags: , ,
Posted in open source | No Comments »

Competition Pro retro joystick USB adapter

Wednesday, October 19th, 2011

Markus decided to reuse an old Commodere 64 Competiton Pro joystick, so he added a USB adapter to it. The retro joystick uses a simple interface over the D-SUB 9 connector, using one connection for each movement direction and one connection per button. He used a PIC24FJ64GB002 microcontroller to translate...

Tags: , ,
Posted in project logs | No Comments »

Recent Comments

  • gant: They still have a couple of the more expensive (but still considerably cheap) 5S-I-S01 in stock...
  • William: lol I'm happy to waste 3c for each program/debug cycle... but probably not the time spent soldering a new device down to a proto board!...
  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...