Posts Tagged ‘Mouser’

Mouser free TI FRAM MCU webinar

Saturday, November 2nd, 2013

Mouser is sponsoring a free webinar on MSP430 FRAM MCUs. This event will provide a technical introduction to embedded FRAM, and provide reference designs that can help with your next project. The sponsors state that attendees will be entered for a chance to win a TI FRAM MSP-EXP430 Experimenter Board...

Tags: , , ,
Posted in components, MSP430 | No Comments »

Box of parts from Mouser for Bus Pirate edu kit

Monday, February 18th, 2013

A box just rolled in from Mouser, two days early by FedEx. Mostly 8pin through-hole chips for the Bus Pirate educational kit. Sadly, not free.

Tags: , ,
Posted in #liveupdates | No Comments »

Soldering Iron Driver v1.5 Mouser order

Friday, March 23rd, 2012

S7726 shared his Mouser part order for the Soldering Iron Driver v1.5. This board is still under development so we haven't yet decided on all the parts we will use. One thing to note is to follow the partlist on the project page, as the schematic has some errors in...

Tags: , ,
Posted in partlist | No Comments »

Updated Bus Pirate v3.5a DIY edition partlist

Thursday, March 22nd, 2012

Bob shared a new Mouser shopping cart for the Bus Pirate v3.5 DIY edition. The Bus Pirate is an open source hacker multi-tool that talks to electronic stuff. Get the Bus Pirate DIY edition PCB from the PCB drawer for $3.95. Get an assembled Bus Pirate for $30, including world-wide...

Tags: , ,
Posted in builds, Bus Pirate | 11 Comments »

Mouser now sells the Arduino

Monday, April 18th, 2011

Chris writes: I noticed that Mouser now sells the Arduino! I am not a big fan of them, but it is great to see how far this little board has gone. They have a wide variety from the Lilypad, Uno, and Mega to lots of shields. Via the contact form.

Tags: ,
Posted in Arduino, dev boards, kit biz | No Comments »

Parts! November 2010

Monday, November 1st, 2010

A box of parts arrived from Mouser today. We're not affiliated with them in any way, just sharing our excitement over a big box of parts. (more…)

Tags: ,
Posted in kit biz | 5 Comments »

A shipment of parts from Mouser

Monday, August 23rd, 2010

Parts! There's gonna be solder! and hot air! (more…)

Tags: , ,
Posted in kit biz | 4 Comments »

Recent Comments

  • KH: A power-off current draw of 4mA for the Sony A6000 is a defect, product recall territory. It hits the camera battery with unacceptable wear and...
  • KH: Hydroponics is like home automation. Every year you have folks who start projects like these and think it will take off and become a big...
  • KH: Read the linked article. The A6000 has an unusually high standby/sleep current. The adapter's quiescent current is not an issue, but the A6000 sleep current...
  • Drone: Jeez, the very limited DCA: 40A/400A±3.0% capability, no RMS at all, and the CAT=DEATH rating makes this a NO BUY at any price - much...
  • Drone: Back-Story... Quoting: "HydroBot is a modular control system for automating hydroponic gardens." More about it here: Interesting work. But I would like to see...