Categories

Posts Tagged ‘LPC1769’

Using Bus Blaster + openOCD on OSX Mavericks

Wednesday, June 18th, 2014

Alvaro wrote an article on using a Bus Blaster + openOCD on OSX Mavericks: I’ve been using the Dangerous Prototypes Bus Blaster along with openOCD to program/debug my LPC1769 microcontroller. It’s been a while since I did anything, so when I tried again last week and couldn’t get it to work,...

Tags: , ,
Posted in Bus Blaster | No Comments »

LPC1769 debugging with Bus Blaster

Thursday, February 28th, 2013

Alvaro tweeted: Woot! Debugging LPC1769 with @dangerousproto Bus Blaster works! The Bus Blaster is a high-speed JTAG debugger for ARM processors, FPGAs, CPLDs, flash, and more. You can get a Bus Blaster v2 for $34.95 at Seeed.

Tags: ,
Posted in Bus Blaster | 2 Comments »

Simplecortex ARM Cortex M3 dev board

Monday, March 26th, 2012

Riktw designed, and got ITead Studio to produce, a Cortex M3 based Arduino compatible board called Simplecortex. The board uses the LPC1769 microcontroller from NXP: The Simplecortex is a microcontroller development board that is shield compatible with the Arduino. The Simplecortex has a fast microcontroller, the LPC1769 from NXP. This...

Tags: , ,
Posted in ARM, dev boards | 10 Comments »

Recent Comments

  • gant: They still have a couple of the more expensive (but still considerably cheap) 5S-I-S01 in stock...
  • readybrek: Anyone got a any recommendations for a budget-priced hot air station?
  • William: lol I'm happy to waste 3c for each program/debug cycle... but probably not the time spent soldering a new device down to a proto board!...
  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!