Today we got a new warning from Eagle’s CAM processor when exporting gerbers to make PCBs. When the CAM processor started we got the error “Board contains a polygon that may cause extremely large plot data”. After some removing nearly every component from the PCB, we found that it was related to the arrows on […]
Tag Archives: bug
Cadsoft Eagle v6 bug
We received this error when using the new version of Eagle: WARNING: Most unfortunately, after the whole release process for version 6.0.0 had been finished, it turned out that there is a bug in the polygon handling of the CAM Processor. If a board contains signal polygons that have their “Orphans” parameter set to “off”, […]
Debugging a glitch on a CoolRunner-II project
While working on his CoolRunner-II 50Mhz counter project jbaele found a bug. The reset line was showing a serious glitch when the stop signal was sent to the counter. The glitch was found to be the result of having the stop and reset signals next to each other on a ribbon cable. The capacitance of […]
Comments issues
There is an intermittent issue with the comments. Some users are seeing other user details in the comment box. We tried a full reinstall, disabling plugins, flushing the cache, etc, but the issue persists. We posted a support query in the WordPress forum, and have been hanging out in the IRC channel. No solutions so […]