Categories

Posts Tagged ‘BP v4’

Bus Pirate v4 rev 2 hello world

Tuesday, October 26th, 2010

The second Bus Pirate v4 prototype passed the self test today. This update fixes a few minor issues in pin connections, and it's the first prototype with the PIC 24FJ256GB106 that will be used in the final hardware. Follow our progress in the BPv4 firmware development forum.

Tags: ,
Posted in BP v4, Bus Pirate, Development | No Comments »

Soldered prototypes

Friday, October 22nd, 2010

A big box of PCBs arrived earlier today. Here's the current progress: 3 PIC USB LCD backpacks, 2 Bus Pirate v4, and a USB POV Toy. Still waiting on a couple parts, but these boards are almost done.

Tags: , ,
Posted in BP v4, PCBs, testing | 1 Comment »

Week in (p)review: September 5, 2010

Sunday, September 5th, 2010

Here’s some highlights from the past week, in case you missed them: USB Infrared Toy firmware v07 with bug fixes Updated WinLIRC plugin supports transmitting with the IR Toy SparkFun has the Logic Sniffer in stock. Thanks for helping us raise awareness of this open source project Honken demoed the...

Tags: , , , , ,
Posted in week in review | No Comments »

Week in (p)review: August 29, 2010

Sunday, August 29th, 2010

Here’s some highlights from the past week, in case you missed them: v06 USB Infrared Toy firmware with transmit mode The USB LCD backpack is nearly ready for a prototype The computer controlled voltage/current source/sink picked up a few new contributors Bus Pirate v4 worked over USB for the first...

Tags: , , ,
Posted in week in review | No Comments »

Free PCB Sunday: Bus Pirate v4 prototype

Sunday, August 1st, 2010

We go through a lot of prototype PCBs, and end up with lots of extras that we’ll never use. Every Sunday we give away a few professionally-made PCBs from one of our past or future projects, or a related prototype. Our PCBs are made through Seeed Studio’s Fusion board service....

Tags: , ,
Posted in Free PCBs | 19 Comments »

Free PCB Sunday: Bus Pirate v4 prototype

Sunday, July 25th, 2010

We go through a lot of prototype PCBs, and end up with lots of extras that we’ll never use. Every Sunday we give away a few professionally-made PCBs from one of our past or future projects, or a related prototype. Our PCBs are made through Seeed Studio’s Fusion board service....

Tags: , ,
Posted in Development, Free PCBs | 22 Comments »

Week in (p)review: July 4, 2010

Sunday, July 4th, 2010

Here’s some highlights from the past week, in case you missed them: Bus Pirate firmware v5.1 was released. v5.0 was a major update with lots of changes, v5.1 corrects some bugs we missed in beta testing. Logic Sniffer test release v2.11 extends the memory available for samples and implements RLE...

Tags: , , , , , , ,
Posted in week in review | 1 Comment »

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please