Categories

DIY Moteino guide

Posted on Thursday, April 26th, 2018 in DIY, tutorials by DP

p-image9-600

Felix writes, “I posted a short illustrated guide for making your own Moteino from SMD components. It also includes details how to burn the bootloader and fuses. Check it out here. Thanks and credit goes to forum user LukaQ for his contribution of the images and test sketches in this guide!

See the full post at LowPowerLab.

This entry was posted on Thursday, April 26th, 2018 at 11:33 pm and is filed under DIY, tutorials. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please