Free PCB Sunday: Pick your PCB

Posted on Sunday, May 14th, 2017 in Free PCBs by DP


We go through a lot of prototype PCBs, and end up with lots of extras that we’ll never use. Every Sunday we give away a few PCBs from one of our past or future projects, or a related prototype. Our PCBs are made through Seeed Studio’s Fusion board service. This week two random commenters will get a coupon code for the free PCB drawer tomorrow morning. Pick your own PCB. You get unlimited free PCBs now – finish one and we’ll send you another! Don’t forget there’s free PCBs three times every week:

Some stuff:

  • Yes, we’ll mail it anywhere in the world!
  • Be sure to use a real e-mail in the address field so we can contact you with the coupon.
  • Limit one PCB per address per month please.
  • Like everything else on this site, PCBs are offered without warranty.
  • PCBs are scrap and have no value, due to limited supply it is not possible to replace a board lost in the post

Be the first to comment, subscribe to the RSS feed.

This entry was posted on Sunday, May 14th, 2017 at 10:50 pm and is filed under Free PCBs. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

23 Responses to “Free PCB Sunday: Pick your PCB”

  1. Iain NoSpam says:

    A random comment from a very random commenter.

  2. Denise says:

    Trying again :)

  3. Sebastian says:


  4. Clay says:


  5. Bob Mays says:

    Sounds like a great deal.

  6. Mikee says:

    One more time!

  7. Crawford says:

    Try, try, try!

  8. Kurt says:

    A mother’s happiness is like a beacon, lighting up the future but reflected also on the past in the guise of fond memories.

  9. WillC says:


  10. WillC says:

    Random random

  11. Allen David Brown says:

    The universe is random

  12. Derek says:

    Today is Sunday.

  13. Jacob says:

    Free is a great way to start a new project!

  14. microwattbott says:

    hope I make the cut off. yes, I could use one, for sure.

  15. hli says:


  16. Samuel says:

    have a nice week everyone

  17. Admir says:

    Me please!

  18. Vladimir says:

    Thank god of randomness

  19. LHK says:

    The time may be too late…?

  20. Daniel says:

    Let’s skip it this time.

  21. Geoff says:

    Yes please…belatedly

  22. Peter says:

    Yet another one.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Drone: So these go for around $330 USD and NO published calibration procedure online or otherwise? Given what's inside - I don't think I'll be considering...
  • Pekka Akselin: This is ridiculous!? :-) We are back at 256(!) byte EPROMs that needed multiple, a handful, of voltages to run! :-(
  • KH: Let's try a back-of-envelope calc balancing energies. From MCP1700 datasheet, there are graphs for a 200mA load step. Estimate the energy shortfall as 12uJ. Say...
  • Daniel: It's been a week and my comment is still awaiting moderation. Apparently the CIA doesn't want their involvement known?
  • KH: Agree, so okay, I guess he must have learned from somewhere. 100nF and 1000uF is so far apart, that was jarring; it's more magic incantation...