OpenBench Logic Sniffer ported to Pipistrello LX45

Posted on Monday, September 16th, 2013 in Logic Sniffer by DP


mkarlsson ported the Open Bench Logic Sniffer code to run on Pipistrello LX45:

FYI, I have ported the Demon 3.07 code to Pipistrello LX45 FPGA board with the following changes:

1) The sample buffer size is increased by a factor of 8 from 24kB to 192kB
2) The interface is changed to serial (Pipistrello uses a FTDI 2232H High-speed USB chip)
3) The baud rate is increased from 115200 to 921600 to reduce the data upload time
4) The meta data has changed to indicated Pipistello implementation

I believe this is the largest buffer size of any of the “SUMP” implementations. It runs great with the latest JaWi OLS Java client.

Via the forum.

Get a Logic Sniffer for $50, with free worldwide shipping.

This entry was posted on Monday, September 16th, 2013 at 11:04 am and is filed under Logic Sniffer. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

3 Responses to “OpenBench Logic Sniffer ported to Pipistrello LX45”

  1. ken says:

    Hmm…200MHz sampling.

    A Pipistrello LX45 is $150:

    Still need probes (not sure where to get them) for a logic analyzer…

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Nathan Johnson: 100 channels. Not many are legal in any given area. Be sure to comply with local laws.
  • William Brodie-Tyrrell: It's getting to the point where it's cheaper and definitely easier to use a Pi Zero or similar and a $20 3G USB dongle. Power...
  • KH: IIRC most of the actual operating system of modern HDDs is in one of the platter(s); the stuff on the 25VF010 is a bootup firmware......
  • Trev: I don't know of any inexpensive 3G modules (prices start around $US 50), but it does explain why 2G modules are relatively inexpensive by comparison....
  • Zonie: This site Rocks!