Color Meter project

Posted on Tuesday, August 27th, 2013 in project logs by DP


Isonno posted his Color Meter  in the  project forum:

It’s a digital meter for measuring color; either the reflected color of solid object, or emitted light. It works, but the original goal was to measure/calibrate the output of RGB LEDs driven by PWM, but that didn’t work out so well.

Via the forum.

This entry was posted on Tuesday, August 27th, 2013 at 6:00 pm and is filed under project logs. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “Color Meter project”

  1. ken says:

    can you measure color output from photography studio strobes accurately?

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • KH: Using an alkaline coin cell down to 1.0V or under is a very bad idea anyway, unless you as the designer or manufacturer don't care...
  • KH: Farnell says TS1001 is no longer stocked. Not on RS. Digikey says it's obsolete. That said, there are a lot of nanoamp-class parts on sale...
  • Peter: Sunday--
  • Chris Brightly: Best of luck to all, including the wayward prototypers yet to post!
  • Wolfi: o/