Categories

Workshop Update for August 16th, 2012

Posted on Thursday, August 16th, 2012 in Workshop Update by DP

Today we finished the Singapore Maker Faire video. Sent out thank yous. Refreshed the Logic Sniffer wiki a bit and moved older stuff to a new page.

Maker Faire New York applications are due tomorrow (August 17th). We submitted a request for a table and a presentation proposal. We’ll also be giving a 10 minute talk about USB at the Open Hardware Summit around 3pm.

The Bus Pirate Demo Board v5 firmware was cleaned up, and submitted to our SVN. We fixed a few bug in the I2C ADC and DAC emulators.

We updated the FT311D breakout Board with some hardware changes. We added pull-ups on the I2C lines, broke out the 3.3, and 5v power lines, and added jumpers for the I2C pullups.

This entry was posted on Thursday, August 16th, 2012 at 11:00 pm and is filed under Workshop Update. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “Workshop Update for August 16th, 2012”

  1. Philip says:

    those badges are awsome/!!

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Bob: Jambalaya rocks.
  • KH: I should point out something... well, lead acid car batteries are designed to be well-charged all the time. The plates (which are patterned and thin)...
  • David Haile: You are a smart person and absolutely correct. That kind of current needs a lead acid car battery behind it. Still, it does have its...
  • KH: The solution discussed in the linked article is wrong. It's a largish Lipo (2500mAh) and he thinks 77uA is acceptable... ha ha ha ha ha....
  • Dave: I never had to opportunity to learn or use this stuff when I was in college (I'm sooo old that op-amps were just being developed...