Categories

Contiki on the web platform documentation update

Posted on Tuesday, February 7th, 2012 in Development, firmware by DP

Shuckc ported Contiki OS 2.5 to run on the web platform. Now some additional documentation is available to help get you started with this port.

Contiki is an open source operating system for embedded devices. It supports both IPv4 and IPv6 internet protocols, and is not too taxing on memory, usually taking around 40KB of ROM and a few K of RAM.

Get an assembled web platform for $40, including worldwide shipping.

This entry was posted on Tuesday, February 7th, 2012 at 11:00 pm and is filed under Development, firmware. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Bob: Jambalaya rocks.
  • KH: I should point out something... well, lead acid car batteries are designed to be well-charged all the time. The plates (which are patterned and thin)...
  • David Haile: You are a smart person and absolutely correct. That kind of current needs a lead acid car battery behind it. Still, it does have its...
  • KH: The solution discussed in the linked article is wrong. It's a largish Lipo (2500mAh) and he thinks 77uA is acceptable... ha ha ha ha ha....
  • Dave: I never had to opportunity to learn or use this stuff when I was in college (I'm sooo old that op-amps were just being developed...