Soldering iron driver update

Posted on Friday, December 30th, 2011 in project logs by DP

Arhi posted pictures of his latest soldering iron driver build:

Here are the pictures of the populated board. Actually the DC driver is not populated as I’m not very interested in it and there’s no usb connector and D10, R40 as those are also only required for USB operation and I ain’t going to be using USB not even for bootloader, all debugging I’ll do trough serial and programming trough ICSP connector on board. The PIC18F2550 is not in the “stand” because I was still testing how analog side of things worked (works perfectly). Now I’ll go write some firmware to get this puppy running :)

Via the project log forum.

This entry was posted on Friday, December 30th, 2011 at 1:00 pm and is filed under project logs. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Stephen Tinius: Thank you.
  • KH: Ah, the site sells boards, that's the reason. At least it's a XC6SL9 board that does not cost an arm and a leg, though it...
  • Max: While I understand this is more educational than practical in nature, I prefer my edutainment a lot more firmly grounded in economic reality. Sure, you...
  • KH: Using an alkaline coin cell down to 1.0V or under is a very bad idea anyway, unless you as the designer or manufacturer don't care...
  • KH: Farnell says TS1001 is no longer stocked. Not on RS. Digikey says it's obsolete. That said, there are a lot of nanoamp-class parts on sale...