DIY door lock reminder

Posted on Monday, October 10th, 2011 in project logs by DP

Pppd got tired of forgetting to lock his door so he made a door¬†lock reminder. Once you open and close the door the device starts buzzing and doesn’t stop until you lock it. It is battery powered and uses ATtiny13, two reed buttons, and a buzzer. Source of the firmware is available.

When the door gets opened it activates, powers up the second switch via PB3 and waits for the door to be closed again checking PB1 level. It then checks the lock status and keeps beeping until you lock the door (PB4 level).

Via the forum.

This entry was posted on Monday, October 10th, 2011 at 12:00 pm and is filed under project logs. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

One Response to “DIY door lock reminder”

  1. You know therefore significantly relating to this subject, produced me in my opinion imagine it from so many various angles. Its like men and women aren’t fascinated except it is one thing to do with Girl gaga! Your personal stuffs outstanding. At all times deal with it up!

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • Drone: The LM7171 used in this very simple design can be simulated in LTspice with reasonable results at 10MHz using the non-encrypted PSPICE model from TI...
  • Jon Jackson: I would be interested in 1 or 2 of your circuit boards. Jon
  • Max: An actual Saturday "detector" built with the same hardware would use the precisely timed slightly varying length of the day (and some built-in astronomy data)...
  • KH: In the old days, these things remained on paper forever as whimsical scrawls. Today, they are brandished about on blogs for the entire world to...
  • KH: So he doesn't really know what he's doing. Yawn. It's sensor-controlled. It's not an oscillator. A leaf covers the window, you're toast. TLV3702? Overkill. The...