Hemal Chevli made this Arduino based waveform generator. He wrote a post on his blog detailing its assembly: Finally, after sitting in the TODO list for a long time, I’ve made a basic wavefrom generator based on arduino, made using this instructable as reference. I had an enclosure laying around which has incorrect dimensions for […]
Tag Archives: waveform generator
PSoC3/4/5 built-in waveform generator
Xykon writes: I haven’t used my PSoC board in a while so I checked what’s new and found a new ready to use waveform generator component that makes use of the built-in 8bit dac. I went straight ahead to check it out… Beside the standard sine/square/triangle/sawtooth forms you can either draw your own pattern directly […]
Arduino waveform generator
Chris from PyroElectro constructed this waveform generator using an op-amp, resistor ladder, some trimpots and an Arduino. You can find all the information on how to make your own step-by-step with photos, schematic and code at PyroElectro. Via the contact form.
Miniscope v2d: STM32 oscilloscope and arbitrary waveform generator
Tomeko has posted an article describing miniscope v2d integrated arbitrary waveform generator: Cheap low-speed dual channel PC/USB oscilloscope and arbitrary waveform generator with STM32F3 microcontroller. Miniscope v2d is based on STM32F303CBT6 microcontroller – LQFP48 device from STM32F3 family featuring: 32 kB RAM on data bus 8 kB RAM on instruction bus 128 kB FLASH memory USB […]