Categories

Posts Tagged ‘USB 2.0 Hub’

App note: USB to I2C bridging with Microchip USB 2.0 Hubs

Friday, June 12th, 2015

App note on Microchip's USB 2.0 Hubs on its I2C support. PDF link here The USB to I2C bridging feature of Microchip's USB 2.0 hubs provides system designers expanded system control and potential BOM reduction. When using this feature in a system design, a separate USB to I2C device is...

Tags: , , ,
Posted in app notes | No Comments »

App note: USB to GPIO bridging with Microchip USB 2.0 Hubs

Thursday, June 11th, 2015

App note on Microchip's USB 2.0 Hubs on its GPIO capabilities. PDF link here The USB to GPIO bridging feature of Microchip's USB 2.0 hubs provides system designers expanded system control and potential BOM reduction. General Purpose Input/Outputs (GPIOs) may be used for any general 3.3V level digital control and...

Tags: , ,
Posted in app notes | 7 Comments »

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please