Categories

Posts Tagged ‘TM240A’

Kicad converter for TM-240A Pick-and-Place machines

Monday, September 22nd, 2014

Kicad converter for TM-240A Pick-and-Place machines by Wayne and Layne: The Pick-and-Place machine needs to know where to place each part, and we have created some software to help convert the PCB design data from our favorite ECAD tool, KiCad, into the proper file format needed for these PnP machines. The...

Tags: , ,
Posted in tools | 1 Comment »

WORKSHOP VIDEO #56: TM220A table top pick and place overview

Thursday, February 21st, 2013

[embed]http://www.youtube.com/watch?v=yRxcYO0nuD8[/embed] Today we take a look at an inexpensive pick 'n' place machine found on the Chinese auction site Taobao for 22800RMB (about $3,600).  A pick and place is a machine that puts electronic components onto a circuit board that has been coated with solder paste. To complete the prototype...

Tags: , , ,
Posted in tools, Videos | 90 Comments »

Recent Comments

  • KH: A power-off current draw of 4mA for the Sony A6000 is a defect, product recall territory. It hits the camera battery with unacceptable wear and...
  • KH: Hydroponics is like home automation. Every year you have folks who start projects like these and think it will take off and become a big...
  • KH: Read the linked article. The A6000 has an unusually high standby/sleep current. The adapter's quiescent current is not an issue, but the A6000 sleep current...
  • Drone: Jeez, the very limited DCA: 40A/400A±3.0% capability, no RMS at all, and the CAT=DEATH rating makes this a NO BUY at any price - much...
  • Drone: Back-Story... Quoting: "HydroBot is a modular control system for automating hydroponic gardens." More about it here: http://protofusion.org/wordpress/2016/07/hydrobot/ Interesting work. But I would like to see...