Categories

Posts Tagged ‘scratch and dent’

Web Platform scratch and dent on its way to recovery

Thursday, January 3rd, 2013

Tom redeemed one of his 7400 competition coupons for a Web Platform from the scratch and dent category of our free PCB drawer. He was able to ping it successfully and get it recognized over USB, so it looks like the major IC's are functioning as intended. Dangerous Prototypes recently organized...

Tags: ,
Posted in web platforms | No Comments »

Bus Pirate scratch and dent brought back to life

Monday, December 17th, 2012

Tom chose to redeem one of his coupons for a Bus Pirate v3 from the scratch and dent category of our free PCB drawer. On arrival it was faulty, but he was quick to diagnose a problem with the FT232RL USB-to-serial IC on board. After replacement the Bus Pirate came...

Tags: , ,
Posted in Bus Pirate, Free PCBs | No Comments »

Recent Comments

  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...
  • jose: Part removal described here is pure butchery, the cheapest hot air station will do a fast and clean job removing the QFP, heat air to...
  • Cody: Yes please