Categories

Posts Tagged ‘Proxmark3’

Recovering Proxmark3 with the Bus Pirate

Friday, October 20th, 2017

@joan_bono tweeted, "Breathing again! My Proxmark3 works like a charm after re-flashing the firmware using Bus Pirate" Get your own handy Bus Pirate for $30, including world-wide shipping. Also available from our friendly distributors.

Tags: ,
Posted in Bus Pirate | No Comments »

JTAG flashing Proxmark3 using Bus Pirate

Thursday, July 18th, 2013

MMN-o from Umea Hackerspace successfully recovered his Proxmark3 using the Bus Pirate:  Sure, there are cheap, hackable alternatives that connect to the parallell port, but that interface is unfortunately of a pretty bygone era. So given that I did not have access to a true parallell port at the time, I had to...

Tags: ,
Posted in Bus Pirate, JTAG | 1 Comment »

Recent Comments

  • Max: Hey, good job quoting as an abstract something the author writes about someone else's project... For the record, I do appreciate the proper attention to...
  • imqqmi: Also interesting to note that arduino's use the DTR signal to reset the device. I found this out because repetier was able to do this...
  • Kevin: A bit sad that you are using a knock off Saleae device unless you are not using Saleae software.
  • Max: For the Haxxor Edition he could add a Morse-to-scan-code translator to the code in the PIC (where the L337 Haxxor Special also accepts Unicode code...
  • KH: Someone with a PIC16F1459 project, well you don't see these every day. Methinks he repeats the USB 2.0 thing too much; this might mislead people...