Categories

Recovering Proxmark3 with the Bus Pirate

Posted on Friday, October 20th, 2017 in Bus Pirate by DP

p1DMYRy1iXcAAJdiv-600

@joan_bono tweeted, “Breathing again! My Proxmark3 works like a charm after re-flashing the firmware using Bus Pirate

Get your own handy Bus Pirate for $30, including world-wide shipping. Also available from our friendly distributors.

This entry was posted on Friday, October 20th, 2017 at 12:30 am and is filed under Bus Pirate. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Recent Comments

  • readybrek: Anyone got a any recommendations for a budget-priced hot air station?
  • William: lol I'm happy to waste 3c for each program/debug cycle... but probably not the time spent soldering a new device down to a proto board!...
  • Joe Desbonnet: Ya, I can recommend the low melting point solder. I used brand 'ChipQuik' and it's amazingly easy to use.
  • Jerome: I need a new BusPirate for the Fablab ;) Many thanks!
  • Max: Seems like an unexpectedly violent way to remove the chip indeed. A hot air station should of course do the job just fine, but in...